Before Ordering a YE3 112M 2, Check These Motor Parameters

November 17, 2026

Before ordering a YE3 112M 2, make sure to look at the specification sheet to see the voltage and frequency, mounting type, shaft size, weight, protection class, duty type, and operating environment. The YE3 112M 2 is a two-pole, three-phase, IE3 induction motor that fits into the 112M frame. Most buyers think it will be 4 kW at about 2,900 r/min, but the datasheet needs to make sure of both numbers. You can use this guide to make sure that OEM engineers, repair shops, and resellers compare the right details, don't send shafts and flanges that don't match, and send a clear call for quotes. The parts are in the same order that I read them.

 Z Series Medium DC Motor
 

Series:YE3
Frame number: 80-450
Power range:
Protection level:IP55
Energy efficiency class: IE3
Voltage range: 380V,400V,415V,660V, etc.
Application:can be used in various fields of the national economy, such as machine tools,water pumps,fans,compressors,and can also be used in transportation, mixing, printing, agricultural machinery, food and other occasions that do not contain flammable, explosive or corrosive gases.
Certificate: international standard IEC60034-30 "Efficiency Classification of Single-speed Three-Phase Squirrel Cage Induction Motors".
Advantage:The high quality of the electric motor guarantees high operational reliability.
Others: SKF, NSK, FAG bearings can be replaced according to customer requirements.

Confirm the Identity and Electrical Data of the YE3 112M 2

Read the Model Code and Nameplate Correctly

Begin with the code. A three-phase squirrel-cage induction motor built to the IEC 60034-30 IE3 class has the code YE3. The shaft center height in millimeters is represented by the number 112 in the YE3 112M 2 according to IEC 60072-1. The number -2 means there are two poles, and the letter M stands for the medium housing length. At 50 Hz, a two-pole motor can go at a synchronous speed of 3,000 r/min. It slows down to about 2,900 r/min because of load slip. Most people who buy this frame think it has a 4 kW rating because that's what it usually goes with. I still need the datasheet to be sure of the power, speed, current, and efficiency for writing. An incorrect nameplate picture from a test unit is found before the production process begins.

Match Voltage, Frequency, and Starting Method

The thing that needs the most work is the voltage. The YE3 series, which includes the YE3 112M 2, includes voltages of 380 V, 400 V, 415 V, 660 V, and others. It comes with a rating of 380 V at 50 Hz, but you can change it to suit your needs. You will need a winding made for 400 V or 415 V line voltage. What is the voltage and frequency of your line? Please tell us in the first message. Next, plan how you'll get the motor going. Some types of drives, like direct-on-line, star-delta, soft starter, and variable frequency drive, need different amounts of current and torque to start up. Tell the provider what kind of load it is and how many starts there will be in an hour. A spindle, a fan, or a conveyor belt may all start with a different load. I also need written information on the rated current, starting current ratio, and starting torque ratio.

Check Insulation, Protection, and Duty Type

The three fields below show how well the YE3 112M 2 handles daily tasks. When the insulation class is F, the winding can only reach 155 °C at its warmest. The rise in temperature must be right for where you are. -15 °C to +40 °C is listed as the ambient range for this series. This means that a site that is very hot or very cold needs its own talk. The housing can handle dust and water jets coming from any direction because it has an IP55 rating. That works well for packing lines, tool sheds, and pump rooms. For duty type S1, the machine stays at full load all the time. You should let the supplier know if your machine stops and starts a lot because S1 data doesn't talk about heavy intermittent duty. The motor shouldn't be used in places with gasses that are flammable, explosive, or corrosive.

Check Mechanical Dimensions, Weight, and Application Fit for the YE3 112M 2

Verify Mounting Form, Shaft, and Flange Details

If one of the motor's sizes is wrong, it might not work at all in real life, even if it fits on paper. Ask for a YE3 112M 2 dimensional drawing that shows the terminal box's location, shaft diameter, shaft length, keyway, and center height. Then check that you have the correct mounting form based on IEC 60034-7. It can be B3 for mounting on the floor, B5 for mounting on a wall, or B35 for both. Find out which of these the supplier can give you for your order. If it's an OEM machine, I compare the drawing from the supplier to the online CAD model. To find the right shaft and key, I don't use a catalog. Instead, I measure the old one. The frame number can tell you the center height, but you still need a drawing to find out the shaft end and flange size. The shaft and keyway don't always match up on replacements, so they don't work.

Confirm Motor Weight and Packaging Data

It's not important how much something weighs until you get a freight quote. Because it depends on the mounting form and the design of the winding and frame, the precise weight of your YE3 112M 2 is more important than a general number. That's why I'm not putting any weight on this. For each item, find out its net weight, its gross weight, its size, and how many units are on a pallet. You can use these numbers to figure out freight, plan lifting at the assembly station, and check how much weight is on the bench or foundation. For people who sell motors in small groups, the packed size tells them how much it costs to ship each one. You should also ask for pictures of the packing. A motor that is shipped in a thin, not-tight box can still arrive with a bent fan cover or a broken terminal box, even if the frame is made of cast iron.

Match the YE3 112M 2 to Pumps, Fans, Conveyors, and Machine Tools

The rated power of a motor doesn't tell you anything about how well it will work with a machine. The YE3 series includes fans, compressors, conveyors, mixing, printing, food equipment, HVAC systems, and water pumps. The YE3 112M 2 is useful for a variety of loads, including fans, centrifugal pumps, and spindle drives. Those who use the pump should make sure they don't go over the motor's shaft power rating at the duty point. People who work with compressors should check the conditions for a loaded start. This is important for conveyor builders to know about because belts usually start out with weight on them. Builders of machines that work with wood and packages should keep track of the duty cycle and the number of starts per hour. So the supplier can check if IP55 and the standard ambient range work, the request should also include things like wind, rain, being outside, and height.

Compare Alternatives, Build Your Request, and Judge the Supplier

Compare the YE3 112M 2 with Y2 and YE4 Options

Customers frequently ask if a YE3 112M 2 can take the place of an old Y2 motor. If you look at the shape and mounting sizes of the YE3 series, it's made to look like the Y and Y2 series. But I still check each frame against a drawing. The first step is to match the power, pole count, frame, shaft, mounting form, voltage, frequency, and protection rating of the two drawings. After that, put them next to each other. The price, lead time, and stock of a YE4 motor can be different because it is a separate line of products. For this reason, I'm not assuming a drop-in swap; I need a separate quote. From the supplier, get a list of the sizes that match the ones you already have. Then, compare them. Use your own tariff and run hours to figure out how much it costs to own the motor every year if it is used a lot.

Prepare a Complete Request for Quotation

There is less need to send emails when there is a full request. Include the model YE3 112M 2, power, number of poles, voltage, frequency, mounting type, shaft requirements, protection rating, insulation class, quantity, destination, and use. Tell me how the machine is controlled, like "direct start" or "drive," and how long it has been running. You should ask the supplier for a datasheet, a sample nameplate, a dimensional drawing, a wiring diagram, test records, and certificates. These groups have approved our goods: CE, ISO 9001:2015, and GOST. The series is based on IEC 60034-30, which lists how efficient something is. Find out how much is in stock, how long it will take to get it, what the minimum order quantity is, and if there are any labels. We can switch out bearing brands if the customer wants something different. Let them tell us what kind of bearing they want now.

Compare Price, Landed Cost, and Supplier Support

The price of a YE3 112M 2 unit is determined by a number of factors, including the materials used, the mounting form, the bearings, the insulation, the certification, the order volume, the packaging, and the shipping terms. Pack the extra time it will take if the wrong shaft shows up, along with the shipping, insurance, duties, and taxes costs. When you look at suppliers, find out who can answer your technical questions and how quickly. Look at records of testing and production, experience with exporting, and the ability to keep track of things. The frame of each motor is carefully die-cast by XCMOTOR, the winding process is automated, and each motor is tested before it is sent out. First, get some samples or a small batch to test. Then, before moving on to bigger orders, compare the motor that was sent to you with the approved drawing. When getting quotes from suppliers, it's better to see proof that they can answer your questions than to just get a price.

Install and Commission the YE3 112M 2, and Avoid Ordering Mistakes

Prepare the Installation Carefully

Protect the motor and the machine it runs by putting them in the right spot. Check the shaft, feet, terminal box, fan cover, and packing for damage when it gets there. You can also turn the shaft by hand to check for rough spots. Before wiring the YE3 112M 2, make sure the base is flat and that the coupling or belt is in the right place. An out-of-aligned two-pole motor has more vibration and bearing load, which is important for a motor that turns at about 2,900 r/min. To wire the terminal box, read the nameplate and wiring diagram and make sure the mounting bolts are tight. Connect the ground too. Check the insulation resistance before you plug it in for the first time. To set the overload protection, it is better to use the nameplate current than to guess.

Record Commissioning Data

When something is commissioned, it sets the standard for maintenance that will follow. Start by running the motor by itself and seeing which way it turns. Write down the noise, vibration, and temperature of the bearing and housing after connecting the load. Also write down the current when there is no load and when there is a load. Compare the value on the plate to the current that was found. If you start the YE3 112M 2 and hear a lot of vibration or noise, check the alignment, base rigidity, and coupling balance before blaming the motor. Check the connections between the fasteners and the terminals one more time after a few hours of use. Keep the order papers and the picture of the nameplate for future reference. This file makes it easy for the supplier's engineer to see what happened if you ever need warranty help. It also helps your team know when to switch people around.

Avoid Common Ordering Mistakes

Order after order has the same wrong things. An 112M-2 motor is thought to be the same size if people only order by model name. They aren't interested in the difference between 380 V and 400 V. Before the technical scope was looked over, the cheapest price was picked. They don't talk about things like the working hours, the type of load, the number of starts per hour, or the weather. Each gap can make it take longer to put the parts together or make the motor too hot. There is a technical confirmation sheet that lists all the electrical and mechanical values that you need to protect your order. Before giving the supplier the go-ahead, look at your installation and compare it to the drawing they sent you. Make sure you like a sample or drawing before you make a bigger batch for OEM and resale projects. If it passes those tests, the YE3 112M 2 can be used in a standard two-pole, three-phase application.

Conclusion

Before sending the order for a YE3 112M 2, it is best to double-check all of the parameters. The model code, nameplate power, rated speed, voltage, frequency, insulation class F, IP55 protection, and S1 duty determine the electrical match. The mounting type, shaft, flange, and weight determine the mechanical match. A two-pole motor is right for the job if it can drive the load. Once you've made sure the motor is the right size and rating, you can compare it to the Y2 and YE4 options. It is less likely that mistakes and extra work will happen when there is a full request, a sample or pilot order, and data that shows how the commissioning was done. These checks show that written instructions, not just the name of the model, are what make an order right.

FAQ

1. Is the YE3 112M 2 always rated at 4 kW?

No, the normal pair for a 112M two-pole frame is a 4 kW rating at about 2,900 r/min. Before giving a quote, I check both the datasheet and nameplate to make sure, though.

2. Can a YE3 112M 2 run on a variable frequency drive?

A lot of people ask this about fans and pumps. Tell the supplier what kind of drive you have, how fast it works, and how long the cable is. Also, make sure you get written confirmation of how you set up everything.

3. Which mounting forms can I request?

IEC forms are usually B3, B5, and B35. We'll send you a drawing to make sure the one you want is available after you tell us which one you want.

4. What details do you need for a quotation?

Send the amount, voltage, frequency, mounting form, shaft requirement, use, number of hours it will be used, and country where it is going.

Request a YE3 112M 2 Quote from XCMOTOR

After receiving your specifications at xcmotors@163.com, our team will review your Ye3 112m 2 needs. Our ye3 112m 2 products are brand new, we deliver them for free, you have 30 days to return them, and we're open both Saturday and Sunday to help you. We'll get back to you with the technical information you need after you tell us the voltage, mounting type, quantity, and where the wire is going. Visit motorxc.com to learn more about the products they sell.

References

1. IEC 60034-30-1: Rotating Electrical Machines, Efficiency Classes of Line Operated AC Motors (2014)

2. IEC 60034-1: Rotating Electrical Machines, Rating and Performance (2017)

3. IEC 60034-5: Rotating Electrical Machines, Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines, IP Code (2020)

4. IEC 60034-7: Rotating Electrical Machines, Classification of Types of Construction, Mounting Arrangements and Terminal Box Position, IM Code (2020)

5. IEC 60072-1: Dimensions and Output Series for Rotating Electrical Machines, Frame Numbers 56 to 400 and Flange Numbers 55 to 1080 (1991)

6. U.S. Department of Energy, Improving Motor and Drive System Performance: A Sourcebook for Industry (2014)

Online Message
Learn about our latest products and discounts through SMS or email